Network Configuration; Date And Time Configuration; Checking The Hub Time - AMX Endeleo UDM-RX02 Operation/Reference Manual

Network Configuration

Hubs can be configured for the network environment using the Setup page.
The UDM-0102 does not support DHCP. Always configure a static IP Address.
1. Specify the following network options for the Hub:
a. Hub IP Address, Subnet Mask and Default Gateway;
b. UDP Port (default = 2008)
c. Hub name (maximum of 30 characters).
2. Click on Update to save the new settings to the Hub (FIG. 47).
FIG. 47 Network Settings
All changes are immediate - once the IP address of the hub has been changed
redirect the web browser to the changed address.

Date and Time Configuration

To configure the Hub's Date and Time settings:
1. Click on the Set Time option on the left of the page.
2. Configure the Hub by typing in the correct values for the Date and Time (FIG. 48).
FIG. 48 Date and Time Settings
3. Click on Update to save the new settings to the Hub (see FIG. 47 on page 39).

Checking the Hub Time

Clicking on the date and time displayed at the top of the screen refreshes the clock to the current time.
This can be useful before creating a scheduled event (FIG. 49).
FIG. 49 Hub Date and Time display
UDM-0102 and UDM-RX02 Operation/Reference Guide
Click to save Time settings
Click to refresh Date and Time display
Configuration
Click to save network setting
39