Configuration
4. On initial connection, the Status page is displayed (FIG. 18).
FIG. 18
Status page (Initial View)
Status Page
All of the system control is handled using the Status page (FIG. 19). From this page it is possible to
control:
FIG. 19
Status page
Click the Status link on the left side of the WebConsole to invoke or return to the main Status page.
Input Configuration
The options on the Inputs page allow you to specify the video types and audio sources being presented to
each input port and where appropriate renaming these.
1. Select the Inputs link at the top of the Status page to invoke the Input Configuration page (FIG. 20).
FIG. 20
Input Configuration page
22
Click to access the three areas
of the Status page
Click links to access the four main
areas of the WebConsole
(initial view is Status)
Which input is displayed
Send device control messages to the display device
Create an event for management via the scheduling engine
Device Selection
UDM-0102 and UDM-RX02 Operation/Reference Guide