Configuration
Assigning an IR Command To an UDM-RC02 Remote Control
Ensure that the IR command which the UDM-RC02 Remote control will issue has
been learned by the Hub first. Refer to the Protocols and IR Learning section on
page 49 for details.
1. Select the Control option from the available options at the top of the Status page to access the
Control page.
2. In the Control page, click on the User control link (FIG. 29).
FIG. 29
User Control link
3. This invokes the User Control page (FIG. 30).
FIG. 30
User Control page
28
Click to access User Control options
UDM-0102 and UDM-RX02 Operation/Reference Guide