Table of Contents
Advertisement
Connector Pin Specifications
Pin
I/O
No.
1
-
2
Input
3
Output
4
Output
5
Reference
6
Input
7
Output
8
Input
9
-
Cable Specifications
Cable Connector
Cable Length
•
When using the READY/BUSY control, make sure that the product is in power on
mode before you send the data from the host.
•
With communication protocols such as XON/XOFF, STATUS3, STATUS4 or STATUS5,
a receive buffer full error will occur when the received data is more than the receive
buffer size (2.95 MB). When sending data, monitor the status of the product and keep
the size of the data that is sent to less than 2.95 MB.
•
A parity error is detected when an error occurs after receiving the start code <A>
command.
•
Specifications are subject to change without notice.
Description
Data Carrier Detect
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Not connected
DB-9 Male or equivalent
5 m (16.4 feet) or less
525
Advertisement
Table of Contents
