Table of Contents
Advertisement
(3) Liner
Calculate the values from the following equations to input dots.
◦
203 dpi: Label length (mm) x 8
◦
305 dpi: Label length (mm) x 12
•
This is not displayed if the optional dispenser unit or linerless cutter unit is installed.
•
This is displayed if you have selected [Label] for the media type, and selected [Gap] or
[I-Mark] for the sensor type, and enabled the Label Waste Prevention function.
•
You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
13. Tap
or slide the screen to the left.
14. Adjust the print speed and the print darkness, and then tap
to the left.
15. For the RFID models, tap the RFID tag format to use, and then tap
screen to the left.
Registering Print Settings as Media Profiles (When Using Multiple Types of Media)
148
or slide the screen
or slide the
Advertisement
Table of Contents
