List Of Initial Values; [Printing] Menu - SATO CT4-LX Operator's Manual

Hide thumbs Also See for CT4-LX:

Table of Contents

List of Initial Values

The initial value refers to the setting value of the product when it was shipped from the factory. If you

reset the product, the setting values of the product will change back to the factory default values. The

table below shows the initial value of each setting item and type of reset that changes the value back

to the initial value.

Normally, it is not necessary to perform the initialization. Doing an initialization removes

all the product's settings that the customer changed.

Setting Item

[Media Type]

[Label Length]

[Label Width]

[Auto Measure]

[Printing Mode]

[Ribbon Near End]

[Sensor Type]

Initial Value

If [Print Mode] is set to

[Dispenser], [Tear-Off],

[Continuous], [Cutter], [Cut

& Print] or [Partial cutter]

If [Print Mode] is set

to [Linerless cutter] or

[Linerless tearoff]

Factory Reset