Advertisement
Quick Start Guide
Markings:
Special Conditions for Safe Use (X):
1. Do not replace battery when explosive atmosphere is present.
Ne pas remplacer les accumulateurs si une atmosphère explosive
peut être présente.
2. Use only 00G45-9000-0001 batteries. Utiliser uniquement des
accumulateurs 00G45-9000-0001.
3. The surface resistivity of the housing is greater than 1G Ω. To avoid
electrostatic charge build-up, it must not be rubbed or cleaned with
solvents or a dry cloth.
La résistivité de surface du boÎtier est supérieure à un gigaohm. Pour
éviter l'accumulation de charge électrostatique, ne pas frotter ou
nettoyer avec des produits solvants ou un chiffon sec.
4. Substitution of components may impair intrinsic safety.
La substitution de composants peut compromettre la sécurité
intrinsèque.
7.3
Europe
I1 ATEX Intrinsic Safety
Certificate:
Standards:
Markings:
Special Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth.
2. The measured capacitance between the equipment enclosure and
metallic inline sensor module is 4.7 ㎊. This must be considered only
when the WPG is integrated into a system where the process
connection is not grounded.
3. Do not change the battery when an explosive atmosphere is present.
4. Only replace battery with Rosemount Part No. 00G45-9000-0001.
18
Intrinsically Safe for Class I, Division 1, Groups A, B, C, D T4; Ex
ia IIC T4 Ga T4 (-40 °C ≤ T
Rosemount drawing 00G45-1020; Type 4X; IP66/67
Baseefa16ATEX0005X
EN 60079-0: 2012 + A11: 2013, EN 60079-11: 2012
II 1 G Ex ia IIC T4 Ga, T4 (-40 °C ≤ T
≤ +70 °C) when installed per
a
≤ +70 °C) IP66/67
a
Emerson.com/Rosemount
Feburary 2021
Advertisement
