Advertisement
Feburary 2021
Note
See the
Rosemount Wireless Pressure Gauge Reference Manual
following:
•
Using AMS Wireless Configurator
•
Sensor trim function on absolute gauge
Procedure
1. Vent the device.
2. Connect the Field Communicator.
3. From the HOME screen, enter the HART
Device dashboard Fast
Keys
4. Follow the commands to perform the procedure.
5.7
Activate wireless
Do not activate wireless until Smart Wireless Gateway is installed and
functioning properly; toggling off and on reduces battery life.
Note
If Network ID and Join Key is specified at order entry, then the device will
automatically search and connect to the wireless network when powered
on.
5.8
Join device to network
Procedure
1. Obtain Network ID and Join Key for the wireless network (available in
wireless gateway).
2. From the HOME screen, enter the HART
Device dashboard Fast
Keys
3. Follow the commands to perform the procedure.
4. Select Overview>Status.
5. Verify the communication status displays Connected.
Note
Joining the device to the network could take several minutes.
Quick Start Guide
®
Fast Key sequence.
2, 1, 1
®
Fast Key sequence.
2, 1, 2
Quick Start Guide
for the
13
Advertisement
