Safety - Eddyfi Technologies Magg 310 Manual

Safety

To use this product properly and safely, every user must first read these operating instructions and
observe the safety instructions contained therein. Take care of these operating instructions and keep
them in a place where they can be accessed by everyone. Untrained personnel should not handle or
operate this equipment.
CAUTION: Failure to follow these safety instructions may result in injury or
equipment damage.
WARNING: Hazardous Voltage 36-70 VDC. If the equipment is powered from a
source other than an Eddyfi Technologies provided controller, the power supplied
to the product must have reinforced isolation from the mains with no reference to
earth ground.
Note: To reduce risk of injury and damage to equipment, always store the
Magg™ 310 vehicle in its magnetically shielded storage and shipping box
or store the magnets on a steel plate when not in use.
Note: We strongly recommend using gloves when handling the vehicle to
reduce magnetic pinching hazard.
Document: umed018307
Source Location: C:\epdm\isleng\products\ed-magghd\manuals\umed018307.docm
WARNING: Magnetic Pinch Hazard – The magnetic
chassis is fitted with rare earth magnets. These magnets
are very strong and create an immanent pinch hazard.
Use caution when handling the magnets or vehicle near
steel objects and tools, they may snap together
unexpectedly.
WARNING: Medical Hazard – Operators with
magnetically sensitive medical implants should be aware
of and follow appropriate practices.
WARNING: Electronic Device Interference –
Magnetically sensitive devices, including computer hard
drives, cell phones, watches and credit cards may be
disrupted or damaged by the magnetic field.
Note: Rare earth materials are mechanically weak, and
magnetically very strong. They must therefore be
handled very carefully to avoid damage.
Revision: A01 Created by: ST
Magg™ 310
Date: 24 Feb 2021 IPN: 3097222-A01
Page 8 of 30