Intended Use - Eddyfi Technologies Magg 310 Manual

Magnetic inspection crawler
Table of Contents

Advertisement

WARNING: Trip Hazard - Never stand on the tether. A snap load to the tether
may pull it out from underneath you and cause you to fall. Standing on the tether
may also damage its internal conductors, cause unnecessary wear, and decrease
its life.
WARNING: High Temperature - The camera head and auxiliary lights may
become extremely hot during operation. Allow a cool-down period before
handling.
WARNING: Falling Object - A lifeline or fall arrest system should be used at all
times when the vehicle is navigating on a vertical or inverted horizontal position.
When the vehicle is climbing, never stand below the vehicle operations area.

Intended Use

The Magg™ 310 is an industrial inspection vehicle intended for crawling on steel walls, tanks and
structures and to provide close-up or zoom HD video of the inspection target, which could be a weld,
paint covering, etc. The Magg™ 310 may be used above or below the waterline up to 60 m (200 ft) deep,
or in dry environments. It may also be used in non-magnetic environments with removal of the magnet
cups.
Typical applications include:
Underwater weld and paint inspection.
Potable water system inspection.
Steel Tank inspection.
Large diameter pipe inspection.
Mobile robotics and remote sensing.
Reactor vessel inspection.
Misuse of the system is deployment in a situation for which it is not rated, or incorrect handling.
Examples of misuse include:
In a vacuum.
Beyond its depth rating without factory approval.
Above or below its temperature rating.
Use in a potentially explosive atmosphere.
Use in incompatible chemical environments.
Very high radiation environments (Beta / Gamma).
Prolonged overload (Payload or pulling load).
Camera pointed at the Sun or at intense lighting.
Mechanical impacts & scraping during deployment / magnetic slamming / dropping.
In salt water without an anode.
Document: umed018307
Source Location: C:\epdm\isleng\products\ed-magghd\manuals\umed018307.docm
Revision: A01
Created by: ST
Magg™ 310
Date: 24 Feb 2021
IPN: 3097222-A01
Page 10 of 30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents