Login; General - American Megatrends MegaRAC K1 User Manual

Login

USER USER
PASSWD PASSWD
F3 LOGIN ESC EXIT F3 LOGIN ESC EXIT
You are prompted to login to the MegaRAC K1 when you try to add, edit or delete
information. When you see the login prompt, enter your username and password. The
default root username and password is as follows:
Field
Root Username
Password
Note: The default root user name and password are in lower-case characters.
Note: When you log in using the default root user name and password, you have full
administrative powers. It is advised that once you log in, you change the default root
password.
Depress the <F3> key to continue to login.

General

NAME NAME
SERV SERV
FWVER FWVER
ESC EXIT ESC EXIT
The General section allows you to view and configure the host name, host system
information, and firmware version.
Field Description
NAME This field displays the host name used by the K1. The default MegaRAC K1's name
consists of the words AI and the MAC address of the MegaRAC K1's NIC.
SERV This field displays the host system or KVM information that you have entered. If you have
not entered any information for the Managed Server Information, no information is
displayed.
FWVER This field displays the K1 firmware version.
80 MegaRAC K1 User's Guide
LOGIN LOGIN
: - : -
:
Default
root
superuser
GENERAL GENERAL
:AI0040D9XXXX :AI0040D9XXXX
:Not Configured :Not Configured
:1.X.XX :1.X.XX
F1 HELP F1 HELP
F2 EDIT F2 EDIT
Cont'd