Setting Up Hyper Terminal - American Megatrends MegaRAC K1 User Manual

Setting up Hyper Terminal

The best way to Telnet into the MegaRAC K1 is through Hyper Terminal. It is assumed
that you know how to use Hyper Terminal. Usage of Hyper Terminal is therefore not
documented in this appendix.
Remember
Connect using
Bits per second
Data bits
Parity
Stop bits
Flow control
What
the Serial Port (either COM1 or COM2)
set to 19200
set to 8
set to None
set to 1
set to None
Appendix D : SConsole Utility 101