Step 3 Confirm The Motherboard's Bios Settings; Step 4 Install The K1 Virtual Cd-Rom Drivers - American Megatrends MegaRAC K1 User Manual

Step 3 Confirm the Motherboard's BIOS Settings

Power on the motherboard and enter the BIOS. Using the following table, confirm that
your motherboard's BIOS settings are correct.
BIOS Section
Boot Options> ATAPI CDROM
Advanced> PCIPnP> Configuration> Legacy USB Support
Save the BIOS settings and restart the computer.
Note:
Make sure that your motherboard BIOS supports Legacy USB devices, USB Boot or Boot
to USB.
Note: On some serverboards, depress the <CTRL>, <ALT>, and <ESC> keys simultaneously to
enter the BIOS. On others use the <F2> keys. On most serverboards that use the
AMIBIOS, you can invoke the BIOS setup by depressing the <DEL> key during POST.

Step 4 Install the K1 Virtual CD-ROM Drivers

Install the operating system (if applicable) on the host system.
(Windows 2000/XP only) When prompted for the virtual CD-ROM drivers, select the
default option Microsoft Windows provides. The Virtual CD-ROM device does not
require any special drivers.
10 MegaRAC K1 User's Guide
Setting
AMI Virtual CDROM
Enable