Power Control,
Continued
Using the Serial Port to Control the Power
Click on the
serial port.
Toggle Port Usage
Click on the Toggle Port Usage option to switch between using the K1's serial port as a
Management Port or Power Control Port.
Option
Management
Port
Power Control
Port
option to control the power strip through the Power Strip's
Using Serial Port
Description
This option is typically selected if you want to manage the K1 using
HyperTerminal via the K1's serial port.
This option must be selected if you want to send serial commands via the
K1's serial port to a serial enabled power strip.
Chapter Three : Using Your MegaRAC K1
Cont'd
59