Aux Port; Rs-232 Port - American Megatrends MegaRAC K1 User Manual

Step 2 Connect Cables,

AUX Port

This port is used to attach to an auxiliary optional device. This auxiliary port is originally
designed to allow connection to a device that can control the power on the host system. It
is also designed to supply power to the K1. This would eliminate the need for the AC
Adapter cable.
Note: As of the release of this document, no AUX devices have been designed. The AUX Port
is for future expandability and is an example of AMI's forward thinking.

RS-232 Port

This port is the MegaRAC K1 serial port and is used to configure the MegaRAC K1.
Attach the supplied K1 serial cable to the RS-232 port. Connect the DB 9-pin female
connector of the serial cable to a system that has a Telnet Client such as HyperTerminal.
You can obtain the IP address using this method.
Note: To get the IP address on your MegaRAC K1 locally, you can use the RS-232 port in
conjunction with the KSeek Utility or use the On Screen Display (OSD) feature.
8 MegaRAC K1 User's Guide
Continued
Plug your Auxiliary Cable
into the port marked AUX
Plug your Serial Cable
into the port marked RS232
Cont'd