General Information; Network Information - American Megatrends MegaRAC K1 User Manual

General Information

*** General Information ***
0. Previous Menu
1. Get Firmware Info
2. Get Host Name
3. Set Host Name
4. Set Default Host Name
5. Get Managed Server Info
6. Set Managed Server Info
Enter Command Number:
Menu Item Keystroke
Previous Menu 0
Get Firmware 1
Info
Get Host Name 2
3
Set Host Name
Set Default Host 4
Name
5
Get Managed
Server Info
Set Managed 6
Server Info

Network Information

*** Network Information ***
0. Previous Menu
1. Get Network Information
2. Set NetworkCfg
Enter Command Number:
Menu Item Keystroke
Previous Menu 0
Get Network 1
Information
Set NetworkCfg 2
Description
The SConsole is text-based. Because of this, the navigation is keystroke
driven. '0' will always take you back to the last menu that you were on.
On the General Information Menu, '1' displays the K1 firmware information.
On the General Information Menu, '2' displays the host name used by the K1.
The default MegaRAC K1's host name consists of the words AI and the MAC
address of the MegaRAC K1's NIC.
On the General Information Menu, '3' allows you to set the host name on the
K1.
On the General Information Menu, '4' allows you to revert to the default host
name.
On the General Information Menu, '5' displays the host system or KVM
information that you have entered. If you have not entered any information for
the Managed Server Information, no information is displayed.
On the General Information Menu, '6' allows you to enter the host system or
KVM information.
Description
The SConsole is text-based. Because of this, the navigation is keystroke
driven. '0' will always take you back to the last menu that you were on.
On the Network Information Menu, '1' displays the IP address, subnet mask,
and gateway used by the K1.
On the Network Information Menu, '2' allows you to configure the IP address,
subnet mask, and gateway used by the K1.
Appendix D : SConsole Utility 105