Video Parameters - American Megatrends MegaRAC K1 User Manual

Redirection,
Continued

Video Parameters

The Video Performance Parameters dialog box is a subsection of the Options group. The
Video Performance Parameters allows you to enhance the frame rate of your remote
console session.
Note:
The Video Parameter function is only active on the K1 VGA. The K1 DVI does not
require video tweaking to enhance performance.
Item
Noise Threshold slider
Red Gain slider
Green Gain slider
Blue Gain slider
Horiz. Pos.
Vert. Pos.
Set Default Gains button
Auto Calibrate button
Apply button
OK button
Cancel button
Description
This slider allows you to increase or decrease the performance of the video
redirection by altering the video artifacts. A higher value will increase
visible video artifacts (giving a lower image quality), but at the same time,
increase the frame rate. A lower value will have a better image quality, but
at the same time, decrease the frame rate.
This slider allows you to increase or decrease the amount of red.
This slider allows you to increase or decrease the amount of green.
This slider allows you to increase or decrease the amount of blue.
This slider allows you to modify the horizontal position of the screen.
This slider allows you to modify the vertical position of the screen.
This button allows you to reset the color gains to the default levels.
This button allows the K1 to automatically set the color gains and noise
thresholds.
This button allows you to immediately apply the changes.
Left click the OK button to save your settings.
Left click the Cancel button to exit without saving your settings.
Chapter Three : Using Your MegaRAC K1
Cont'd
47