Dc 6V Port; Ps/2 And Video Cables - American Megatrends MegaRAC K1 User Manual

Step 2 Connect Cables,

DC 6V Port

You can attach the cables in any order except for the AC Adapter cable. The AC Adapter
cable must be attached to the K1 before attaching the PS/2 mouse.

PS/2 and Video Cables

Your K1 will boot up and become active. The Status LED will be amber. Connect the
PS/2 Keyboard cable, PS/2 Mouse cable, Video In cable, and opposite side of the USB
cable to your host system. Connect your PS/2 Keyboard and PS/2 Mouse to the K1 PS/2
Keyboard and PS/2 Mouse connector. Plug the Video Out cable to your Display Device.
Note: You must connect AC power before attaching the PS/2 mouse.
Continued
Plug your AC Adapter
into the Power Port
Chapter Two : Installing Your MegaRAC K1 9