Appendix A On Screen Display (Osd); Overview; Entering Osd - American Megatrends MegaRAC K1 User Manual

Appendix A

Overview

NAME NAME
IP IP
F2 MENU F2 MENU
The On Screen Display (OSD) is the best way to immediately determine the host name
and IP address assigned to your MegaRAC K1. You can also set up the MegaRAC K1's
network, user access, and firewall parameters.

Entering OSD

You can invoke OSD by depressing the <CTRL>, <ALT>, and <SHIFT> keys on your
keyboard simultaneously. Verify that the following is true before trying to enter the OSD
utility:
1
2
3
The MegaRAC K1 OSD screen appears on the monitor that is physically attached to the
MegaRAC K1's VGA Out port. It displays the current host name and IP address.
NAME NAME
IP IP
F2 MENU F2 MENU
On Screen Display (OSD)
K1-VGA K1-VGA
:AI00.40.D9.XX.XX :AI00.40.D9.XX.XX
:XX.XX.XX.XX :XX.XX.XX.XX
F1 HELP F1 HELP
ESC EXIT ESC EXIT
Verify
Make sure that you are using the keyboard that is attached to the PS/2 port located on
your MegaRAC K1 device.
Make sure that you have the MegaRAC K1 connected to your host system correctly.
Make sure that your host system is powered on.
K1-VGA K1-VGA
:AI00.40.D9.XX.XX :AI00.40.D9.XX.XX
:XX.XX.XX.XX :XX.XX.XX.XX
F1 HELP F1 HELP
ESC EXIT ESC EXIT
Appendix A : On Screen Display (OSD) 77