1.2 Isolator switch
1.3 In an emergency
1.4 Product liability
1.5 Attention symbols
The machine must always be equipped with a separate isolator
switch in the feed power supply. The isolator switch must be easily
accessible on a wall close to the machine. The external electrical
isolator switch must be marked "I" and "O" to identify the position
of the switch.
•
Switch off the main switch.
•
Close shutoff valves in the water and any steam supply lines.
This product complies with the European Medical Device Directive
93/42/EEC, the European Machinery Directive 2006/42/EC, and
the Low Voltage Directive (LVD) 2006/95/EC.
approval of ArjoHuntleigh AB's product liability.
There are warnings, instructions, and advice in this manual that
require extra attention. The symbols and designs used are:
Risk of injuries or machine damage.
Hot surface. Risk of injury.
Read the manual before use.
7