Storage : San Volume Management; Storage : Assign Target - American Megatrends StorTrends 1100-P User Manual

Storage. : SAN Volume Management
This page appears if you click on any existing Pool and then on an existing SAN.
Volume.. This page displays SAN Volume information and Target. information. It also
allows you to Delete or Expand Volumes, schedule snapshots and disable/enable
advanced caching.
Field Description
Volume. Name This field displays the name of the SAN. Volume..
Advanced Caching This field allows you to modify the Advanced Caching.
Status Mounted/In Use
Deleting
Unmounted/Not-in-Use
Restoring Snapshot.
Restoring Snapshot. Failed The SAN. Volume. has failed restoring from snapshot.
Failed
Capacity. This field displays the capacity of the SAN. Volume..
Volume. Type This field displays the type of the SAN. Volume..
Provision Type This field displays the provisioning type being used on the SAN. Volume..
Expand button Click on this button if you wish to increase the size of your volume.
Date Time Created This field displays when the SAN. Volume. was created.
Storage. : Assign Target
This page appears if you click on any existing Pool and then on an existing SAN.
Volume.. This page allows you to assign, remove and disable targets.
Field Description
Name This field displays the name of the Target..
Status This field displays the status as either Enabled or Disabled. You can use the
Enable/Disable button to change this status.
Member Volume. List This lists displays all the SAN. Virtual Volumes assigned to this Target..
User Currently This list displays all the logged initiators.
Logged into this
Target.
The SAN. Volume. is mounted and ready to use.
The SAN. Volume. is being deleted.
The SAN. Volume. is not mounted and is not in use.
The SAN. Volume. is being restored from a snapshot.
The SAN. Volume. has failed.
Chapter Two : Managing the ManageTrends Storage Appliance 59