Storage; What Is Iscsi; San Versus Nas; Iscsi Network Overview - American Megatrends StorTrends 1100-P User Manual

Storage.

What is iSCSI?

iSCSI. is Internet. SCSI., an IP-based storage networking standard which maps SCSI
blocks into Ethernet. packets, developed by the Internet Engineering Task Force (IETF).
Basically, the iSCSI protocol is a method for transporting low latency SCSI blocks across
IP networks. By carrying SCSI commands over IP networks, iSCSI is used to facilitate
data transfers over intranets and to manage storage over long distances. The iSCSI
protocol increases the capabilities and performance of storage data transmissions.
Because of the wide use of IP networks, iSCSI can be used to transmit data over LANs,
WANs, or the Internet and can enable location-independent data storage and retrieval.
SAN. versus NAS
iSCSI. is a Storage. Area Network. (SAN.) technology. SAN is a block-level based
storage solution. Applications that require block-level based storage, such as Microsoft
SQL server and Microsoft Exchange server, can use a SAN device for storage.
Network. Attached Storage. (NAS.) is a file-level based storage solution. You cannot use
it with applications that require block-level based storage.
iSCSI. Network Overview
An iSCSI. network can consist of the following:
•
a server with a network interface card(s) or Host. Bus Adapter (HBA) with iSCSI.
over TCP./IP capability, such as a server running Microsoft 2003 Server. and iSNS.
server.
•
a storage device with an iSCSI.-enabled Ethernet. connection(s), such as the
StorTrends iTX.
•
an IP switch.
•
a host computer that is running an initiator that initiates storage traffic with the target
storage device.
Note:
Some iSCSI.-based networks contain iSCSI storage switches and routers. Since most
current SANs use Fibre Channel technology, multi-protocol switches (or storage routers
capable of translating iSCSI to Fibre Channel) must be used so that iSCSI connected
hosts can communicate with existing Fibre Channel devices.
Storage. traffic is commonly initiated by a host computer, initiator, and received by the
target storage device. Since target devices can have multiple storage devices associated
with them (each one being a logical unit (LUN)), the final destination of the data is not
the target, but the specific LUN within the target.

Initiator.

An iSCSI. Initiator is a system (server, workstation, storage device, router and switch)
that starts (initiates) the transfer of information to and from an iSCSI target.

Target.

An iSCSI. Target (such as a volume located in the ManageTrends) is any device that
responds to and communicates with the iSCSI initiator, using the TCP./IP protocol and
the iSCSI protocol.
Chapter Two : Managing the ManageTrends Storage Appliance 47