Enter Volume Size
In the Enter Volume Size field, enter the size that you want to use for your NAS Volume.
The field is measured in Giga-Bytes GB.
Select Thin or Exact Provisioning
Select the type of provisioning that you want to use.
If you select Thin, the volume can be assigned a size greater than the actual physical size
of the storage device. For example, if the storage device has an actual physical size of
500 GB, the user can assign a size of up to 8 TB per box. Based on the consumption of
the storage device's physical capacity, more physical drive capacity can be added later as
desired.
If you select Exact, the volume size cannot exceed the actual physical space available in
the storage device.
Note:
It is also recommended to leave 20% of the physical space free for snapshots.
Select NAS as the Dialect Type
Select NAS as the Dialect Type.
Create Share and Share Name
Place a check next to Create New Share if you wish to create a NAS Share at this time,
otherwise click the Add button and continue on to the next step. If you want to create a
NAS Share now, in the Share Name field, enter a unique name for your NAS Share. The
NAS Share Name must be alphanumeric and be between one and 63 characters in length.
If you want to use spaces be sure to use quotation marks around the entire name you type
in.
Click the Add button to continue.
22
ManageTrends (version 2.6) Web Interface User's Guide