Step Four: Configure NAS Volume
This section allows you to configure a NAS Volume and a NAS Share on to
the Storage Appliance. If you only want to configure this storage appliance
as a SAN Only unit, SKIP THIS STEP by clicking the Finish button and go
to Step Five: Summary View and Status.
The next page allows you to Create NAS Volume and Share.
Enter Volume Name
In the Enter Volume Name field, enter a name for your NAS Volume. The NAS Volume
Name must be alphanumeric, not have any spaces and be between one and 63 characters
in length.
STOP!
Chapter One : Storage Appliance Configuration
21