Piper Comanche PA-24 Service Manual page 545

PIPER COMANCHE SERVICE MANUAL
_.
DISTRIBUTER
TIMING MARK
FIGURE 7B·10. FILED NOTCH ON CAM
e. Tum
rOtor
in
direction of rotation until timiq mark on drive member is between the outside
timing
marl<
on the "L" side and indented dot on flange of bollSin,. Ligbtly flick adjusting knob of the
Holding To"l and allow rotor
to
come to rest. With rotor in this position. align
timing lin. of the Timing
Pointer with full r..,ster position
amin,
mark. R.check timing pointer position by ...... flicking Holding
Tool. POinter should come to rat a1igned with the timing mark. Tighten adjustment knob of Holding Tool
until pr ..... r.
IS
appli.d on housing flange prev.nang rotor from turning fre.ly.
A'"
ROTOR HOI.DING TOOl.
TIMING POINTER
FIGURE 7B·11. INSTALLATION OF ROTOR HOLDING TOOL AND TIMING POINTER
POWER PLANT
ISSUED:
8/18m
2
F15