Piper Comanche PA-24 Service Manual page 304

PIPER COMANCHE SERVICE MANUAL
TABLE
v-n_
TROUBLESHOOTING afART (SURFACE CONTROLS) (conL)
Trouble
Lost motion
betwem
trim conaol hanclle.
Trim conaol handle
moves
with
excessive
resistance.
Trim tab faili
'0
reach full travel.
SURFACE CONTROLS
ISSUED: 1/1Bn2
eau..
STABILATOR TRIM CONTROL SYSTEM
Cable .ension '00 iow.
Cables not in place on
pulleys.
Broken pulley.
Link ... 100 .. Dr worn.
Sy.em no. lubricated
properly.
Cable tension too high.
Pulley. binding Dr rub-
bing.
Cables not in place on
pulley •.
Trim tab hinge binding.
Cables crossed or
routed incorrectly.
System incorrectly
ris-
ged.
Trim drum incorrectly
wrapped.
IH14
Remedy
-
Adjust in Kcordance
willi Table V-I.
Insall abies KCOniing
to
Paragraph
'-38.
Replace pulley.
Check linkace and tight-
en or replace.
Lubricate
11'."".
(R ..
fer to Lubrication
Chart_ Section II.
Adjust in accordance
with Table V-\.
Replace bindins pulleys.
Provide clean.nce
between pulley. and
brack ....
Refer
'0
Paragraphs
5-38.
Lubricate hinge. If
necessary. replace.
Check routing of con-
Irol cables.
Check and/or adjust
rigging per Pan-
graph
'-39
Check and/or adjust
rigging per Pan-
graph 5-<10.