Page 1
Certi ed for Microsoft Teams All-in-one Video Collaboration Bar MeetingBar A20 English | 简体中文 | Deutsch | Français | Español Quick Start Guide (V1.3)
Page 3
Yealink MeetingBar Yealink MeetingBar Teams Edition Zoom Edition For downloading the video, please go to the official https://support.yealink.com/ website:...
We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance. • Use the Yealink original adapter (48V/0.7A) to charge the endpoint only. The use of the third-party adapter may cause the damage to the endpoint. •...
Page 6
You can operate the A20 either by remote control (only Teams edition), CTP18 or mouse. If you connect a touch display device, you can also use touch control. CTP18 Connection Ethernet Cable 7.5m Ethernet Cable Make sure that CTP18 and the MeetingBar A20 are in the same LAN.
Page 7
Zoom Edition Upgarde the Firmware You need to upgrade the firmware of MeetingBar A20 and CTP18 separately. 1. (Teams) Go to More > Settings > Device Settings > About obtain IP address. (Zoom) Go to Settings > System Setting > About obtain IP address.
Page 8
Endpoint Installation • Mount on a Wall A20 position H>120cm H<120cm Wall Mounting Use the bracket to mount your endpoint on a wall. The mounting height affects your camera view. The recommended height is 1.1m above the ground. Step1: Assemble the mounting bracket Step2: Mount the A20 to the wall Hole depth: 30mm Hole diameter: 6mm...
Page 9
• Using Yealink TV Mount Bracket Note: The TV stand should be purchased separately.
Page 10
• Put on a TV stand cart platform Silicone Pad • Put on a desk Adjusting the Camera Tilt 15° 15°...