Compak PKF Instruction Manual page 25

10.3. ERROR MESSAGES AND
SOLUTIONS
Portafilter not saved:
the portafilter is not in the memory. The
display shows the message "Portafilter
NOT RECOGNISED. REPEAT THE
PROCESS".
Portafilter removed during taring:
Indicates that the portafilter has been
removed during the taring. The display
shows the message "TARING ERROR.
REPEAT THE PROCESS".
Sudden change of portafilter during
taring: There has been a sudden change
in the measured portafilter weight during
taring. The display shows the message
"TARING ERROR. REPEAT THE PROCESS".
Sudden change in weight during grinding:
There has been a sudden change in the
measurement while grinding. The display
shows the message "WEIGHT EXCEEDED.
REMOVE Portafilter".
Portafilter removed during grinding:
Indicates that the portafilter has been
removed during the grinding. The display
shows the message "REPEAT THE
PROCESS".
Maximum grinding time exceeded:
while grinding, the preset time is reached
before the target weight, the grinder will
ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
in automatic mode,
If,
10.
stop. The display shows the message
"GRINDING TIME EXCEEDED. REMOVE
Portafilter".
Extra weight detected during grinder
start-up: During the grinder's start-up time,
there must be no weight on the support,
if it is turned on with the portafilter or
something else in the support, the machine
will produce an error. The display shows
the message "START-UP ERROR. REPEAT
THE PROCESS".
SETTINGS
25