Compak PKF Instruction Manual page 22

9. OPERATION
9.4. MANUAL GRIND MODE
This operating mode allows you to use the
weighing system manually.
To do this, insert the portafilter or dosing
container into the portaportafilter, select
TARE to set the weight to 0; start the
grinding cycle using the Grind button for
dose production ( ) or the manual Refill
8
button ( ), the weight of the ground coffee
17
will be shown in real time on the display.
9.5. PRESET MODE
In this operating mode, we preset one,
two or three* doses of coffee by pressing
the corresponding number icon on the
display's settings buttons (
The pre-selection of one, two or three*
doses will remain active until it is
changed by pressing the one, two or three*
preset number button. This pre-selection
will be shown on the display (
corresponding icon.
22
).
)by its
ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
9.6. INSTANT MODE
In this operating mode, you can select
1, 2 or 3 coffee doses by pressing the
corresponding number icon on the LCD
screen once ( ). First, the portafilter must
first be inserted, the TARING message
appears and the Select Dose message,
after pressing 1, 2 or 3 the grinding cycle
begins until the desired dose is reached.
The Refill button ( ) allows the portafilter
17
to be filled manually once the grinding
cycle is finished. It must not be used during
the grinding cycle or the taring operation
as it will result in weighing errors or error
messages.