Compak PKF Instruction Manual page 13

7.3. WHERE TO USE IT
The appliance must be installed on a
solid. flat surface.
The minimum size for the
working space, to ensure you
get the best performance from
the machine, must be the following:
Height
Width
Depth
• Install the grinders on tables that are
completely level and in areas free
from external vibrations
• Install the grinders in areas where
there are installations with a ground
connection.
• Avoid places where abrupt changes
in temperature, humidity or airflow
may occur.
NOTE: This coffee grinder should
not be installed in places (SUCH AS
INDUSTRIAL KITCHENS) where are
expected to be cleaned using water jets.
ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
mm
730
28.74
in
mm
235
9.05
in
mm
420
16.75
in
7. INSTALLATION
7.4.
INSTALLING THE COFFEE GRINDER
Before connecting the coffee grinder, check
the following:
• The characteristics on the data plate
must match those of the electrical
mains network.
• The electrical connection plug
matches the socket into which it is to
be plugged.
• Ensure that the electrical power of
the facility is adequate for the power
consumed by the appliance.
• The point of connection to the
electrical mains network must be
protected with the appropriate
electrical protection device.
• The equipment must be correctly
connected to a ground connection
according to the current safety
regulations.
• There is an equipotential connection
in accordance with the provisions
of current regulations, in order to
avoid electrostatic build-up. The user
must then connect this to the various
other pieces of equipment or connect
it to a to a ground point, using the
terminal marked with the
(according to the UNE-EN 60335-2-
102:2016 standard).
symbol
13