9.2.
USE
Operating considerations.
Taring the Portafilter:
The grinder will respond to a minimum
weight by going into the tare state. This
minimum weight is set to 200 gr.
The grinding start and end times must
be followed. You must take note of the
informational messages that appear on the
screen.
Minimum dose:
Limit the minimum dose to approximately
9 g to get the best results.
There is generally a small difference in
weight between the portaportafilters stored
in automatic mode, so that they can be
detected correctly. This minimum is set to
4 g.
The grinding pause function is not available
on models with a scale.
Different Operating Modes: 4 different
operating modes can be selected from the
programming menu (Fig. 5): AUTOMATIC
MODE, MANUAL GRIND MODE, PRESET
MODE AND INSTANT MODE.
ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
9.
OPERATION
9.3.
AUTOMATIC MODE
This allows 10 distinct portaportafilters
or dispensing cups of different weights to
be stored by assigning a distinct weight
to each of them (improves workflow and
avoids errors in the choice of brew recipe).
To set the weight assigned to each
portafilter, go to the SETTINGS /
Portafilter SETTINGS / STORE Portafilter
/ INSERT Portafilter / TARING... /
Progr.X .. / WEIGHT ---.- g / PRESS
OK; you can increase or decrease the
dose using the +/- buttons. Confirm with
OK / PROGR. X STORED / REMOVE
Portafilter.
If you want to delete any of the previously
saved portafilters:
SETTINGS / Portafilter SETTINGS /
DELETE Portafilter / PASSWORD: 0000
/ DELETE HOLDER MEMORIES 1, 2, 3
...... .OK.
To use:
Insert the portafilter into the holder, the
taring message appears, detects the
assigned program and grinds until it
reaches the desired dose. / REMOVE
HOLDER.
21
Need help?
Do you have a question about the PKF and is the answer not in the manual?