Table of Contents
Advertisement
Sensormatic
SENSORVISION SYSTEMS
Required Parts
Required Parts
Standard Ceiling Mount
0351-0376-01
Description
Q t y .
Bar, ceiling tee
1
S-hook, open
2
Chain, Navy link
6 FT
Tab
2
Clip, T-bar
4
Procedure
1.
Remove the ceiling tile(s) and inspect
the ceiling frame. The frame must be
capable of withstanding 9kg (20 lbs) of
weight and the forces generated as the
dome pans and tilts.
IF CEILING FRAME CANNOT
SUPPORT DOME, ASK
BUILDING MAINTENANCE
TO INSTALL ADDITIONAL
CEILING SUPPORTS.
For 2x2 openings, skip steps 2 and 3.
2.
Cut the 2x4 ceiling tile to 60.3cm (23.75")
using the length of the T-bar supplied [a]
as a guide. Then, attach this T-bar (see
detail) by centering steel tab [b] through
the slot at end of the T-bar. Bend the tab
as shown [c].
3.
Slide the tab through the slot in the
existing frame [d] 61cm (24") from the
T-bar opposite. Bend the ends of the tab
outward [e] to secure. Repeat for the other
end of bar.
*
U.S. Customary Measurements in italics are rounded off.
Q-4
THE WORLD LEADER IN LOSS PREVENTION
Part No.
0500-0263-01
2897-0004
2898-0002
0500-0264-04
1400-0033-01
*
19cm
(7.5")
60.7cm
(23.9")
[a]
AREA OF DETAIL
[d]
[e]
[c] [b]
Advertisement
Table of Contents
