Table of Contents
Advertisement
Sensormatic
SENSORVISION SYSTEMS
COLOR CAMERAS ONLY!
WARNING:
procedure ONLY if the imager head
cable was dislodged from the
camera while performing the back
focus adjust- ment procedure or
while replacing the color camera.
IMPORTANT:
the ribbon cable as it is seated in the
camera. The exposed contacts of the
cable provide the connection between
the camera and the imager head.
Procedure
Using a pair of needle nose pliers, grab the ends of
the camera cable clamp [a] and gently pull it up until
it swings to one side [b]. Next, noting how the ribbon
cable is looped [c], reseat the cable into the
connector. Finally, using the pliers,
push the top of the clamp down to
lock the cable in place.
Cable contacts face this way.
Needle Nose Pliers
Q-44
THE WORLD LEADER IN LOSS PREVENTION
Perform this
Note the orientation of
Color Camera
[a]
Ribbon Cable
[c]
Imager
Head
Lens Body
[b]
Advertisement
Table of Contents
