Operation - ADJ Startec Series User Manual

Stinger Spot
Universal DMX Control: This function allows you to use a universal DMX-512 controller to
control the chases and patterns, dimmer and strobe. A DMX controller allows you to create
unique programs tailored to your individual needs.
1. The Stinger Spot has 2 DMX channel modes; 9 channel mode or 11 channel mode. See 9-Chan-
nel Mode and 11-Channel Mode section for details.
2. To control your fixture in DMX mode, follow the procedures in the DMX Set Up section as well as
the set-up specifications that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions in the DMX Set Up section to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows either a single unit or a set of several units that have
been linked together to run to the beat of the music.
1. Press the MENU button until "SOUN" is displayed, and press ENTER. Press the UP or DOWN
buttons so that "ON" is displayed and press ENTER.
2. Press the MENU button until "SENS" is displayed, and press ENTER. Use the UP and DOWN
buttons to adjust the sound sensitivity. Press ENTER when you have found your desired sensitiv-
ity level.
Show Mode: This mode allows either a single unit or several unit that have been linked togeth-
er to run one of four shows that can be selected by the user.
1. Press the MENU button until "SHND" is displayed, and press ENTER.
2. Press the UP or DOWN buttons until you find your desired show, and press ENTER.
ADJ Products, LLC - www.adj.com - Stinger Spot User Manual Page 15

Operation