Operation - ADJ X-move LED plus User Instructions

OPERATION

Operating Modes: The X-Move LED Plus™ can operate in three different modes. In each mode you can run
the fixture as a stand alone fixture or in a master/slave configuration. This next section will detail the
differences in the operating modes.
• Sound Active mode -
The fixture will react to sound, chasing through the built-in programs.
• Show mode -
The fixture will run one of four shows that you choose.
• DMX control mode -
This function will allow you to control each individual fixtures traits with a standard DMX-512 controller such as
™
the Elation® Show Designer.
Master-Slave Operation This function will allow you to link up to 16 units together and operate without a
controller. The units will be sound activated. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units together via the XLR connector on the rear of the
units. Remember the Male XLR connector is the input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a terminator at the last fixture.
2. On the Master unit find your desired show and set that show by pressing the ENTER button.
3. On the slave units tap the MENU button until "SLND" is displayed, and Press ENTER. Choose either "SL 1"
or "SL 2" and press ENTER. See page 10 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control: This function allows you to use a Elation® universal DMX-512 controller to control
the chases and patterns, dimmer and strobe. A DMX controller allows you to create unique programs tailored
to your individual needs.
1. The X-Move LED Plus™ is a eight DMX channel DMX fixture. See pages 16-17 for detailed description of
the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 9 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on the last fixture.
7. For help operating in DMX mode consult the manual included with your DMX controller.
Sound Active Mode: This mode allows either single unit or several units linked together, to run to the beat of
the music.
1. Tap the MENU button until "SOUN" is displayed, and press ENTER. Tap the UP or DOWN buttons so that
"ON" is displayed and press ENTER.
2. The optional UC3 Controller (not included) may be used to control different functions including blackout.
Show Mode: This mode allows either a single unit or several units linked together, to run one of four shows
that you choose.
1. Tap the MENU button until "SHND" is displayed, and press ENTER.
2. Tap the UP or DOWN buttons until you find your desired show, and press ENTER.
A.D.J. Supply Europe B.V. – www.americandj.eu – X-Move LED Plus™ Instruction Manual Page 10