ADJ Startec Series User Manual page 13

Stinger Spot System Menu
DISP - This function will reverse the display 180 degrees.
1. Press the MENU button until "DISP" is displayed, and press ENTER.
2. Press UP or DOWN to flip the display between regular ("DISP") and inverted ("DSIP"). Press EN-
TER to confirm your selection.
TEST - This function will run a self-test program.
1. Press the MENU button until "TEST" is displayed, and press ENTER.
2. The fixture will now run a self-test.
VER - Use this function to display the software version of the unit.
1. Press the MENU button until "VER" is displayed, and press ENTER.
2. The display will show the software version.
RSET - Use this function to reset the unit.
1. Press the MENU button until "RSET" is displayed, and press ENTER.
2. The fixture will now reset to default factory settings.
ADJ Products, LLC - www.adj.com - Stinger Spot User Manual Page 13