Operation - ADJ Inno Spot Elite User Instructions

Inno Spot Elite
RPrism Offset
- Home setting adjustment for the rotat-
ing prism.
1. Press the ENTER button for at least 3 seconds, then press the
UP or DOWN buttons so that "RPrism Offset" is displayed, press
ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
Focus Offset
- Home setting adjustment for the focus.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that "focus" is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 18
System Menu
Inno Spot Elite
Master-Slave Operation
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit find your desired show and set that show by
pressing the ENTER button.
3. On the slave units
displayed, and Press ENTER. Choose either "Slave 1" or "Slave
2" and press ENTER. See pages 12-13 for more info.
4. The slave units will now follow the Master unit.
Universal DMX Control:
universal DMX controller to control the chases and patterns, dimmer
and strobe. A DMX controller allows you to create unique programs
tailored to your individual needs.
1. The Inno Spot Elite is a 14 channel DMX fixture. See pages 21-23
for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 12 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
units linked together, to run to the beat of the music.
1. Press the MENU button until
This function will allow you to link up to 16
tap the MENU button until "Slave Mode" is
This function allows you to use a Elation
This mode allows either single unit or several
"Sound State" is displayed, and
ADJ Products, LLC - www.adj.com - Inno Spot Elite Instruction Manual Page 19

Operation

®