General Information - ADJ Startec Series User Manual

Stinger Spot
Unpacking: Thank you for purchasing the Stinger Spot by ADJ Products, LLC. Every Stinger Spot
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-
aged, carefully inspect your fixture for any damage and be sure all equipment necessary to operate the
unit has arrived intact. In the event damage has been found or parts are missing, please contact our
toll-free customer support number for further instructions. Please do not return this unit to your dealer
without contacting customer support first.
Introduction: The Stinger Spot is a DMX intelligent, moving head, mini LED fixture. The Stinger Spot
can operate as a stand alone fixture or in a primary/secondary configuration. The Stinger Spot has
three operating modes: sound active mode, show mode, and DMX controlled. This fixture is suitable
for theaters, studios, retail stores, and other similar locations. For best results use fog or special effects
smoke to enhance the beam's projections.
Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide help and
to answer any question should you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are
Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
Voice:
Fax:
E-mail:
To purchase parts online, visit parts.adj.com.
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!
ADJ Products, LLC - www.adj.com - Stinger Spot User Manual Page 3
(800) 322-6337
(323) 582-2941
support@adj.com

General Information