ADJ Startec Series User Manual page 6

Stinger Spot Mounting
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight
without any deformation. When installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, remov-
ing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installa-
tion material being used, and perodic safety inspection of all installation material and unit. If you lack
these qualifications, do not attempt the installation yourself.
The installaiton should be checked by a skilled person once a year.
The Stinger Spot is fully operational in three different mounting positions: hanging upside-down from
a trussing setup, sideways from a trussing setup, or set on a flat level surface.
Be sure this fixture is kept at least 3.3 feet (0.5m) away from any flammable materials, such as deco-
rations. Always use an install an appropriately rated safety cable to prevent accidental damage and/
or injury in the event the clamp fails.
ADJ Products, LLC - www.adj.com - Stinger Spot User Manual Page 6