Operation - ADJ ECO UV BAR 50 IR User Manual

O P E R A T I O N
Airstream IR (sold separately): The remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture, you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor and be no more than 15 feet away. After
you have purchased the Airstream IR transmitter, the app is a free download from the app store for
your iOS phone or tablet. The app comes with 3 pages of control depending on the fixture you are
using. Please see below for the IR Functions in the corresponding app page. Works with App Page 1.
UC IR Remote Control/airstream app
control of various functions (See below). To control the fixture you must aim the remote at the front
of the fixture and be no more than 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
•
FULL ON - Press this button down to fully light up the unit.
•
FADE/GOBO - Press this button to activate UV fade mode. Press
•
button 1 for slow fade, button 2 for medium fade, and button 3 for
fast fade.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the
•
output intensity when UV color mode is active.
STROBE - Press this button to activate strobing. Press button 1
•
for slow strobe, button 2 for medium strobe, button 3 for fast
strobe, and button 4 for the fastest strobing.
COLOR - Press this button to activate UV color mode. Adjust the
•
output intensity using the "DIMMER +" and "DIMMER -" buttons.
1-9 - When in strobe use buttons 1-4 to adjust the strobe rate. In
•
fade mode use buttons 1-3 to adjust the fade speed.
SOUND ON & OFF - These buttons are invalid for this fixture.
•
SHOW - This button is invalid for this fixture.
•
control: The UC IR infrared remote (Included) gives you
9