ADJ Startec Series User Manual page 14

Stinger Spot
To enter the home position adjustment menu, press the ENTER button for at least 5 seconds. In this
submenu you are able to adjust the original position of the pan position, tilt position, color wheel
position, and gobo wheel position.
OPAN - Adjustment of the pan position.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
"OPAN" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OTIL - Adjustment of the tilt position.
1. Press the ENTER button for atl east 5 seconds, then press the UP or DOWN buttons so that
"OTIL" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OGOB - Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
"OGOB" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
OCOL - Adjustment for the color wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP or DOWN buttons so that
"OCOL" is displayed. Press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and then press ENTER to confirm.
Press the MENU button for one second to exit.
ADJ Products, LLC - www.adj.com - Stinger Spot User Manual Page 14
Home Adjustment Menu