Balance Light; Edge Detect; Enhance Light - American Dynamics Intellex Intellex DVMS Operating Instructions Manual

Chapter 3 — Playback Operation

Balance Light

Edge Detect

Enhance Light

Cancel — Click to close this screen without making any
changes to the image.
Help — Click to display online help for this screen.
Use the balance light tool to balance the brightness of the im-
age. The unit redistributes the brightness of the image so it
evenly represents the entire range of brightness.
To apply the balance light tool to the image:
1. Click (down arrow) to display a list of tools.
2. Select Balance Light. The list disappears and Balance Light
appears in the list box.
3. Click Apply to balance the brightness of the image.
4. To remove the effects of the balance light tool after review-
ing the image, click Undo.
Use the edge detect tool to locate the edges of objects in an
image. These edges are displayed in black and white. Other
image detail is ignored.
To apply the edge detect tool to the image:
1. Click (down arrow) to display a list of tools.
2. Select Edge Detect. The list disappears and Edge Detect
appears in the list box.
3. Click Apply to enhance the image.
4. To remove the effects of the edge detect tool after review-
ing the image, click Undo.
Use the enhance light tool to increase the light information
across the image. The unit enhances the brightness of the im-
age so it covers the entire spectrum of the image.
To apply the enhance light tool to the image:
1. Click (down arrow) to display a list of tools.
77