Setting Up Motion Exception; Setting Up Light Change - American Dynamics Intellex Intellex DVMS Installation And Configuration Manual

Setting Up Light Change

1 From the Setup Options screen, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, choose Day Filter > Light Change. Click Setup.
3 In the draw zone: click and draw the target area. The shape must form an enclosed boundary.
4 Adjust the sensitivity with the Sensitivity slider. Click Apply.
The filter allows only one detection area.
5 Repeat steps 2–4 for the Night Filter.
Draw Zone

Setting Up Motion Exception

Motion exception searches for an event or activity by position, size, direction, and speed of a
moving object. For more information, see the User's Guide.
1 From the Setup Options screen, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, select Day Filter > Motion Exception. Click Setup.
3 From the Motion Exception screen, select the target area's shape from the draw zone list.
4 Click and drag in the draw zone to form the target area. Custom shapes must form an enclosed
boundary.
You can select multiple areas; select a shape with each additional selection.
5 Set up additional target areas as needed for other Target Area Settings such as size, speed, or
direction, or a combination of settings.
Note
The target size must fit within the selection area.
6 To use the default settings for size, speed and direction:
a Draw target area(s).
b Click Test to try motion exception filters you configured. The Test Alarm radio button
illuminates when an object meeting your configuration criteria moves through the target
area.
Configuring the Intellex
Installation and Configuration Guide 31