•
The error description.
•
"NO DEVICES FOUND!" in the device selection list.
•
The red "X" indicates that the Discover Devices operation failed.
To resolve the problem, check the Network Configuration of the UR Robot, by
doing the following:
10. Press the Setup Robot button.
11. Press the Setup Network button.
12. If the network of the UR is disabled:
13. If the OnRobot device is connected to the UR robot directly, select DHCP,
and press the Apply button (mark 4). The OnRobot service assigns an IP.
OnRobot © 2018
Appendix 61
www.onrobot.com