R.G.V. DUETTO plus Instruction Booklet For Use And Maintenance page 39

Meat grinder/tomato press/grater

Hide thumbs Also See for DUETTO plus:

Table of Contents

Available languages

d3 -

Position the conical part of the kibbe accessory

(Q1) on the infeed duct (B).

d4 -

Tighten the ring nut (O) using your hands.

While tightening the nut (O) with the other

hand hold the infeed duct (B).

Do not use the star blade (I) or the disks

for grinding for kibbe preparation.

To use the "GRATER"

e1 -

Press the lock button and insert the cutting mechanism made of white plastic in the

entrance of the tube.

During insertion, make sure that the plastic cutting mechanism is

inclined as indicated by the arrow).

Turn the plastic cutting mechanism clockwise until it is fully tightened, and then release

the lock button.

e2 -

Put the barrel of the grater into the cutting unit, and then rotate the cylinder clockwise

so that it is properly closed.

e3 -

Put the tool to push the ingredients in the upper part of the cutting mechanism and

push slowly the foods inside.

Now the 'device' is ready to use.

Table of Contents