Invacare MyOn User Manual page 82

11 REAR WHEELS/FRONT CASTERS
Installing
1. Install permanent axle (B) through washer (C), rear wheel (E) and axle bracket (F).
2. Securely tighten with the existing locknut (D). Torque to 20-40 ft/lbs.
3. Reinstall the dust cap onto the permanent axle.
4. If necessary, repeat STEPS 1-3 for opposite rear wheel.
Quick-Release Axles
Removing
1. Hold the center of the rear wheel (A) and push in the tip of the
quick-release axle (B).
2. Pull the quick-release axle and rear wheel out of the axle bracket
(C) on the wheelchair frame (D).
3. Push in the tip of the quick-release axle again and pull the
quick-release axle out of the existing rear wheel.
4. Install new/existing rear wheel onto wheelchair. Refer to
Removing/Installing Rear Wheels on page 81.
™
MyOn Active MyOn MyOn Jr
A
(B)
FIGURE 2 Removing/Installing Rear Wheels - Quick-Release
82
D
(C)
Axles
Part No 1167417