Invacare MyOn User Manual page 33

Hide thumbs Also See for MyOn:
Table of Contents

Advertisement

Available languages

Available languages

Inspect/Adjust Weekly
Wheelchair rolls straight (no excessive drag or pull to one side).
Quick-release axles lock properly.
Inspect for broken spokes.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
Inspect tires/casters for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
Ensure casters are free of debris.
Inspect/Adjust Monthly
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
Wheel locks do not interfere with tires when rolling.
Wheel lock pivot point are free of wear and looseness.
Ensure all caster/wheel/fork/headtube fasteners are secure.
Ensure all hardware is tight.
Ensure hand grips are not loose.
Ensure casters are free of debris.
For 80° and 90° front riggings, check the mounting pin for excessive wear or damage. Replace mounting pin if worn or damaged.
Inspect front rigging mounting pin and hardware. Specifically, inspect the mounting screw that secures the mounting pin to the front rigging.
Tighten mounting screw if loose.
Inspect/Adjust Periodically
Wheelchair rolls straight (no excessive drag or pull to one side).
Arms are secure but easy to release and adjustment levers engage properly.
Part No 1167417
33
5 SAFETY INSPECTION
MyOn
Active MyOn MyOn Jr

Advertisement

Table of Contents
loading

This manual is also suitable for:

Myon activeMyon jr

Table of Contents