Invacare MyOn User Manual page 43

6.6 Installing/Removing Front Riggings
MyOn and MyOn Active

For maintenance and/or adjustment procedures, refer to Troubleshooting and Maintenance on page 53.
Installing
1. Position the front rigging assembly (A) to the side of the wheelchair frame (B).
2. Insert footrest mounting pin (C) into mounting tube (D).
3. Rotate the front rigging assembly towards the inside of the wheelchair until it locks into place.

The footplate will be on the inside of the wheelchair when locked in place.
4. Repeat this procedure for the other front rigging assembly.
B
Part No 1167417
C
D
A
FIGURE 11 Installing/Removing Front Riggings - MyOn and MyOn Active
43
6 WHEELCHAIR OPERATION
A
™
MyOn Active MyOn MyOn Jr