Invacare MyOn User Manual page 64

9 ARMS
9.3 Adjusting the Height, Depth and Angle of the Armpad Hemi
Adjusting the Height
1. Remove the armpad hemi (A) from the wheelchair. Refer to Removing/Installing the Armpad Hemi on page 63.
2. Loosen the mounting screw (B).
3. Adjust armpad to desired height based upon preset adjustment holes (C).
4. Tighten mounting screw.
Adjusting Depth
1. Loosen the three mounting screws (D).
2. Slide armrest pad (E) to desired depth.
3. Retighten the three mountings screws.
Adjusting the Angle
1. Push the end of the armpad hemi (A) and rotate to one of four preset adjustment angles (0°, 15°, 30°, 45°)
™
MyOn Active MyOn MyOn Jr
64
Part No 1167417