Invacare MyOn User Manual page 69

9.7 Adjusting the Height and Depth of the Flip Back Arms

This procedure cannot be performed on non adjustable height flip back arms
Adjusting Height
1. Remove the flip back armrest (A) from the wheelchair. Refer to Adjusting the Height, Depth, and Angle of the Comfort Arm on page 67.
2. Loosen the mounting screw (B).
3. Adjust armrest (C) to desired height based upon preset adjustment holes (C).
4. Tighten mounting screw.
Adjusting Depth
1. Loosen the two mounting screws (D).
2. Slide armrest pad (E) to desired depth.
3. Retighten mountings screws.
Part No 1167417
D
B
FIGURE 7 Adjusting the Height and Depth of the Flip Back Arms
D
69
E
C
A
™
MyOn Active MyOn MyOn Jr
9 ARMS